Information
With its groundbreaking chemical formulation, VMS Styrene Cement 2.0 ECO is devoid of smelly acetone and has only a mild and pleasant odor and a slower evaporation rate - this means less headaches for you, this glue cannot cause dizziness. It will also react a little slower on plastic, so if you get the glue where it is not supposed to, you can quickly wipe it away and it will not leave any traces! Use the fast type for general cementing, use the slow type for parts that require longer open times such as figures (limb alignment) or cementing single track joints - easily form entire tracks, create hanging - tracks that will remain flexible for around 1 hour before they start to harden.
Combine with: polystyrene
Available volumes: 30 ml glass bottle
Recommended techniques: fine nylon or brush (red sable)
Take it fast or slow with VMS board cements!
Good (poly)styrene cements can make all the difference in the neatness and overall quality of the cementation. As a styrene cementation expert, VMS is the first to offer you a delayed release version of styrene adhesive suitable for parts that require more alignment, such as single track couplings!
For general cementing/gluing
For "scratch builds"
Works with DS (Dragon Styrene®)
"Slow" type suitable for gluing links on caterpillar feet
Product FAQs
What is the best technique for precise application of the adhesive?
Use precision nylon or red sable brush as shown in our videos.
When should you use the slow type?
When you need to adjust and adjust the parts a lot: for tracks, figures (limbs, weapon adjustment), complicated frames or scratch designs.
When should you use the fast type?
For general cementation when additional adjustment is not required.
What is the durability of the cement?
Thanks to the formula, your glue will remain usable for a minimum of 5 years!
How effective is the cement?
One model requires around 2.5 ml of cement and the bottle holds 30. You will be able to complete around 12 1/35 scale models, if used sparingly the glue will be enough to complete around 20 1/35 scale models.
Do I need to clean brushes after using the glue?
No, the remaining glue will disappear and leave the brush clean. For slow-setting cement types, you may need to wipe the bristles with a towel for faster results.
Cement Eco seems to set slowly?
The glue will set a little slower, but that is normal, as it is a slow-evaporating formula that is much safer and more comfortable to work with. To remedy this, apply less glue and hold problematic parts together for 15-30 seconds. Bending parts may need a rubber band or tape, but this is true for all types of cement, parts that do not produce tension can be glued normally with our Eco cements, they just require a few seconds more than usual to glue.
